1, ice-making machine should be installed in the far away from the heat source, no direct sun irradiation, good ventilation, the ambient temperature should not exceed 35 degrees Celsius, to prevent the environmental temperature too high cause the condenser heat dissipation, affecting the ice-making effect. The ground of the ice-making machine should be solid and smooth, the ice-making machine must be kept level, otherwise it will result in no ice removal and noise during operation.
2, the production of ice to machine back and left side gap is not less than 30cm, the top clearance is not less than 60cm,
3, ice-making machine should use independent power supply, dedicated line and equipped with fuse and leakage protection switch, and to reliable grounding.
4, ice-making machine to meet the national drinking water standards, and add water filtration devices, filter impurities in the water, so as to avoid clogging water pipes, pollution sinks and ice molds. and affect the performance of ice-making.
5, cleaning the ice-making machine should be turned off the power, strictly prohibited with the water pipe directly to the fuselage flushing, the application of neutral detergent scrub, is strictly prohibited with acidic, alkaline and other corrosive solvent cleaning.
6, the ice-making machine must be two months to open the water hose pipe head, cleaning the water valve strainer, to avoid the sand in the mud impurities blocking the inlet, and causing the inflow of water to become smaller, resulting in no ice.
7, ice-making machine must be cleaned every two months condenser surface dust, condensation heat dissipation will cause compressor parts damage. Cleaning, use vacuum cleaners, brush, such as washing condensation surface oil dust, can not use sharp metal tools to clean up, lest damage the condenser.
8, ice-making machine water pipes, sinks, storage refrigerators and protective film to be cleaned every two months.
9, ice-making machine is not used, should be clean, and with the hair dryer blow dry ice mold and box moisture, in non-corrosive gas and ventilated dry place, to avoid open storage.