First, the ice-making machine should be installed away from the heat source, no direct solar irradiation, good ventilation, the ambient temperature should not exceed 35 degrees Celsius to prevent excessive ambient temperature caused the condenser heat dissipation, affecting the ice-making effect.
Second, the ice-making machine to meet the national drinking water standards, and add water filtration device, filtration of impurities in the water, so as not to plug pipes, pollution sinks and ice mold and affect the ice-making performance.
Third, cleaning ice machine should turn off the power supply, strictly prohibit the use of water pipes directly aimed at the body flushing, the use of neutral detergent scrub, strictly prohibited with acid, alkaline and other corrosive solvent cleaning.
Four, must sweep every two months the condenser surface dust, the condensation heat dissipation bad can cause the compressor part damage. Cleaning, the use of vacuum cleaners, brush and other clean condensate surface oil dust, can not use sharp metal tools to clean, lest damage the condenser.
The ice-making machine is not used, should clean, and blow dry ice with hair dryer mold and the water in the box, put in no corrosive gas and ventilated dry place, avoid open storage. VI, ICE-making machine service life and water quality is very large, if more impurities in the water, or the water quality is hard, long time will be in the evaporator ice plate left scale, scale accumulation will seriously affect the ice-making time and efficiency, increase energy costs, and even affect normal business. It is recommended to install water treatment equipment and regularly clean the scale on the ice plate. This will prolong the life of the ice-making machine and maintain a high ice-making efficiency.