Ice-making cycle: through the replenishment of the water valve, water automatically into a storage tank, and then through the flow control valve to the water through the pump to the shunt head, where the water is evenly sprayed onto the ice-making surface, like a curtain flowing through the wall of the ice-making device, the water is cooled to freezing point, and the water not frozen by evaporation will flow through the porous trough into the reservoir, heavy
New start cycle work. Ice-mining cycle: When the ice reaches the required thickness (thickness can be selected by the operator/user), the exhaust gas from the compressor back to the ice cooler clip wall, replacing low-temperature liquid refrigerant. This creates a membrane of water between the ice and the evaporating tube wall, which is lubricated when the ice is freely dropped into the trough below by gravity. The water produced during the ice-mining cycle will be returned through the porous trough to the reservoir, preventing the wet ice from being expelled by the machine.